Physical Testing Equipment Range

The LCT combines three tests in one instrument – crease strength, box forming force and spring-back with optional friction testing for the ultimate carton analysis and quality assurance.

Touchscreen Precision Seal Strength / Tensile / Compression Tester for determining the strength of packaging materials including plastics, paper and board.

The Chalmers DST uniquely measures the MD Torsional Stiffness of corrugated board, to quantify how well the board has been made, how much damage occurred during converting, and how well the board protects it’s contents.

Universally Calibrated, better than Grade 0.5 EN 7500-1, DIN 51221 ASTM E-4. AFNOR A03-501. Range 0.4% to 100% minimum. Automatic identification of load cell. Resolution 1 part in 500000 with autoranging. Electronic load cell protection.

The GF-392 Gelbo Flex Tester is a microprocessor controlled system, with a user controllable pre-set method programmed for ASTM F392. This makes the GF-392 both versatile and very easy to use, with only minimal user training needing.

Puncture resistance is a useful characteristic to determine the performance of a thin film particularly when packaging items that are likely to pierce the film, such as sharp, pointed, and hard items of food, electronics, medical devices etc.

The FD-1709 Falling Dart Impact Tester determines the impact resistance of plastic film using a free-falling dart.

Touchscreen Precision Seal Strength / Tensile / Compression Tester for determining the strength of packaging materials including plastics, paper and board.

When you need to work out the bending resistance of paper, paperboard, plastic film, medical tubing, and wire, you’ll find our 79-56 bending test machine will flex to your requirements.

If you need to accurately measure the crease and board stiffness of a range of paper based samples, the Crease and Board 79-15 wraps up all of your requirements.