For precise measurement of heat sealability of flexible packaging. Produces seals up to 50mm long x 5 to 25mm wide.

For rapid determination of heat sealability of flexible packaging. Produces 3 or 5 independently temperature controlled seals, up to 15mm wide x 30mm long.

Touch Screen Precision Hot Tack Tester for determination of the hot tack seal strength of flexible packaging materials, to ASTM F1921. In vertical (VFFS) and horizontal (HFFS) form-fill operations, heat seals are often subjected to forces whilst still hot. If the hot seals are unable to resist these forces then unsealed areas or holes into the package can occur during the process. The RDM HT-1XS Hot Tack Tester measures the strength of hot seals enabling selection and compliance testing of suitable flexible materials for packaging applications.

Hot Tack Tester with automatic film feeding device for determination of the hot tack seal strength of packaging films, to ASTM F1921. e HT-2PC Hot Tack Tester is a highly technical instrument designed to measure the ‘Hot Tack Seal Strength’ of flexible packaging materials. It follows the principles of ASTM F1921 Standard Test Method for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and blends comprising the sealing surfaces of flexible webs.

For standard determination of heat sealability. Produces seals up to 50mm long x 5 to 25mm wide.

Precision Low Pressure Laboratory Heat Sealer – for accurate and repeatable determination of heat seal threshold in low pressure heat seal materials often used in tobacco and confectionery industries.

HL-5 Low Pressure Heat Sealer used to determine the sealability of various papers, foils, laminates and films. The Low Pressure Heat Sealer HL-5 allows you to determine the sealability of coated paper, aluminium foils and laminates as well as other heat-sealable multi-layer films. You can easily determine the optimum sealing parameters for any film types used for pressure-sensitive packaging applications.

The world’s most advanced Oxygen permeation measurement system. Fully automatic testing, fast set-up, faster results, no Oxygen sensor calibration needed.

The OX-TRAN 2/28 H is designed for laboratories that routinely perform a high quantity of OTR tests on mid to high-level barriers.

The OXTRAN 2/12 the world’s most advanced permeation system. Fully automatic oxygen 02 permeation system with faster results.

The OX-TRAN Model 2/40 Oxygen Permeation Analyzer is specifically designed to measure the oxygen transmission rate (OTR) of whole packages

The OX-TRAN 2/48 series is the ideal solution for ambient whole package testing for OTR, testing more packages in less time than traditional methods.

The Ox-Tran 1/50 is a low-cost unit designed for testing Oxygen Transmission Rate (OTR)

The AQUATRAN-W 3/38 H is designed for laboratories that routinely perform a high quantity of WVTR tests on mid to high-level barriers

The AQUATRAN 3/40 is the next evolution in whole package testing for Water Vapor Transmission Rate (WVTR)

The AQUATRAN 3 analyzer is the industries most trusted WVTR instrument for high to ultrahigh-level barriers because it can measure each molecule of water vapor entering the sensor.

The world’s most advanced Water Vapour permeation measurement system. Fully automatic testing, fast set-up, faster results, lower cost of ownership.

WVTR transmission rate testing of non-wovens, fabrics, textiles, breathable membranes, plastic films and paper.

The AQUATRAN 3/40 is the next evolution in whole package testing for Water Vapor Transmission Rate (WVTR)

The Oxipack Rotator is an automated, in-line leak detection solution for flexible MAP-packages, enabling you to maintain complete control over the process and the quality of your production line. The tester has a testing capability from 20 up to 120 packages per minute.

The Crush Test is designed as a robust, easy to-use instrument. Exactly what you need when performing crush tests. The Crush Tester is suitable for a wide variety of samples, including corrugated board, tubes, paper and plastics.

The Schopper Riegler Beating and Freeness Tester is designed to determine the rate of drainage of a dilute pulp suspension and express it in terms of the Schopper Riegler (SR) value.

The Top Load Compression Tester meets international standards and corporate testing methods for compression strength requirements for a variety of materials and products. A new enhanced microprocessor design with servo motor provides precision force and position control for repeatable instrument performance.

Cobb sizing testers provide a simple, standardized method for fast determination of the quantity of water absorbed by a paper or board in a given time.

The Bendtsen Roughness Tester is a microprocessor-controlled instrument for measuring the roughness and air permeance of paper and board using the Bendtsen method.

Designed for thickness measurements of sheet materials, configurable to meet any ISO, ASTM, EDANA or other International specifications for paper, corrugated, plastics, plastic film, tissue paper, nonwovens, textiles and other sheet like substrates.

Strip Cutter for preparing long strips of samples, 15mm or 25mm wide, for Hot Tack and other testing.

Twin Blade Cutter for Test Samples in Paper, Film, Foil etc

Precision sample punches are designed to eliminate the causes of errors associated with hand-cut samples.

Circular Cutters are used to create a circular sample normally for weight determination

Precision sample cutters are designed to eliminate the causes of errors associated with hand-cut samples.

Transmission densitometers measuring ISO Virtual diffuse Optical Density.

Precision Digital Thickness Gauge with extended ‘reach’ intended for measurements up to 120mm (4.7″) from the edge of film or sheet material

Precision digital thickness gauge that allows the user to take quick, accurate measurements.

Bench thickness gauge designed to give consistency between different operators

Leak and seal strength testing of all types of flexible, semi-rigid and rigid packages using air pressurization.

The Dansensor® MultiCheck® 2 helps you achieve fast, consistent, and reliable quality control of your MAP packaging process.

The CLT measures according to the non-destructive detection of leaks in packages by the vacuum decay method, ASTM F2338. Oxipack Can Leak Tester (CLT) is the solution for testing different types of cans.